1 PhotoLink Scanner User Guide
10 Operating the Scanner Initial Setup 1. Peel off the tape that secures the guide lever (first time only procedure.) 2. Connect the plug on th
11 Power on the PhotoLink Scanner 1. Press the Power button. The power indicator light blinks. Note: For more information on the indicator ligh
12 The photo will be fed through the slot and scanned automatically. The Power and Status/card indicator lights blink while scanning. Note: Refe
13 Suitable and Unsuitable Original Types The PhotoLink Scanner is designed to obtain the best scanning results with the following types of original
14 Photo Protection Sleeves IMPORTANT: To protect your photos, insert your photos into the supplied clear plastic sleeves before scanning your p
15 2. Insert the plastic sleeve (with the folded side first) into the feeding slot of the scanner. Notes: • Remov
16 Connect PhotoLink Scanner to a PC By connecting the scanner to a computer, you can access the scanned images on the memory card directly, or use
17 4. Connect the large end of the USB cable to a USB port on the PC. 5. Insert an unlocked (writable) memory card into a suitable memory card slo
18 Windows Explorer with Microsoft Vista View • You should see an additional drive appear in your PC. • When you click on the “PDSCAN” drive (D: i
19 Note: Do not select “Take no Action” or “Set AutoPlay” to default in the Control Panel. For Windows XP Users When the PhotoLink Scanner is co
2 Table of Contents Table of Contents ... 2Read This First ...
20 Safely Disconnect the Scanner from PC Windows Systems a. On the Windows System Tray, click the hardware removal icon as indicated below.
21 Scan2PC Manager (Scanner to PC Utility) With the Scan2PC Manager, you can easily scan photos and save the scanned images directly to the connecte
22 Using the Scan2PC Manager 1. When the PhotoLink Scanner is detected by the PC, the following Scan2PC Manager window will pop up automatically:
23 Note: If you want to start the Scan2PC Manager manually, double-click the icon on the Desktop, or right-click the icon in the system tray a
24 File Naming and Storage Rules • If the memory card (volume name - PDSCAN) is used with the scanner for the first time, the scanner creates a f
25 casing, image sensor and roller inside the scanner) regularly (about every 100-150 scans) using only the recommended and supplied tools. WARNING:
26 6. When the cleaning process is completed, the cleaning sheet will be ejected from the feeding slot, and the power indicator light will go off.
27 5. Remove the sensor cleaning swab, store it in a safe place and protect it from dust. Calibrate the PhotoLink Scanner If the scanned image l
28 2. Place the scanner and power adapter in a box or bag to keep them from accumulation of dust. 3. Place it in a cool and dry place, inaccessibl
29 Frequently Asked Questions/ Troubleshooting Q: There are strange lines on the scanned image, or the image is not clear. A: Check the followin
3 Cleaning the Image Sensor ... 26Calibrate the PhotoLink Scanner ...
30 Limited Warranty The limited warranty set forth below is given by Pandigital with respect to Pandigital brand electronics products purchased an
31 exclusive remedy of the consumer. Pandigital, its parent company, affiliates or subsidiaries, shall not be liable for any incidental or consequen
32 • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment to an outl
4 Read This First Please read the following important safety instructions carefully before using the PhotoLink Scanner. Failure to observe these i
5 Do not drop or apply shock/vibration to this scanner. Strong impacts may damage the components inside. Do not insert objects other than compat
6 Copyright Copyright Pandigital. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieva
7 Introduction Welcome to the Pandigital Multimedia PhotoLink Scanner! Now you can scan your printed photos and store them into your memory card, no
8 No. Name Function/ Description Power Indicator Indicates the power status of the scanner. (Refer to “Indicator Lights” on page 9.) Paper Guide
9 Scanner Indicator Lights Listed below are the indicator light patterns and the functions they represent: Indicator Lighting Patterns and the Fu
Comments to this Manuals